AEM TestPro CV100

Applications: CAT 5/5E/6/6A/7A and CAT8.2 Class I & II Certifications, TERA, Co-axial cable, Industrial Ethernet, Fiber optic SM / MM Certification, Fiber cable end face inspection, Single Pair Ethernet (SPE), PoE+ testing up to 90W, multi-gig link speed qualification and validation, Wi-Fi and wired Lan network testing, validation and qualification. Wi-Fi dead-zone discovery and validation.

Industry: Smart cities, Smart buildings, High-quality financial institutes infrastructure, Manufacturing, Data centers, Critical Infrastructure, Defense, Army, Navy IIoT, and IoT networks.

Copper Cable Certification Testing

TestPro CV100 has a sophisticated RF measurement engine, able to support up to 3GHz frequency range. TestPro supports all mode combination parameters (including TCL), and exceeds the level 2G accuracy specifications for copper certification testing.

Single Pair Ethernet (SPE)

TestPro supports testing of SPE cable with hot swappable test adapters

Fiber Optic Certification Testing

TestPro’ s Fiber optic measurements provide Tier-1 certification per industry standards as well as customizable limits for both Multimode and Single-mode Fiber Optic premise cabling. Additionally, these adapters include an integrated VFL to provide a quick indication of a break in the wire, as well as an integrated connection port for measuring electrical voltage for hybrid-powered fiber applications in support of smart building initiatives.

Fiber Optic End Face Inspection

Dirty connectors are the most common cause of fiber optic link underperformance. The fiber inspection feature of TestPro allows you to check the cleanliness of fiber end faces in both installation and troubleshooting environments.

Scalable and Flexible

The TestPro 100 comes with optional detachable adapters that enable a wide variety of test functions to cater to the needs of today’s network infrastructures, as well as to easily scale to cater to future requirements.

Autotest feature

Autotest is the easiest way to ensure that cabling links will support the desired network rate. It is also fast at 6 seconds including all optional test parameters such as TCL, ELTCL, DC Resistance Unbalance, and more.

PoE testing

The AD-NET-CABLE adapter provides comprehensive testing for verifying PoE deployments. It supports all PoE standards including 802.3 af/at/bt and UPOE for reporting of PSE configuration and SNF full load testing with reporting of Current/Wattage/Voltage. In addition, it also allows for sustained loading of the PoE source over longer periods to identify hard-to-find intermittent power drops, through external loads.

Multi-gig Link Speed Qualification

TestPro is capable of validating a link to ensure Ethernet can be supported at 1/2/5/5/10GBASE-T. It can perform SNR measurements while under traffic and PoE load, ensuring confidence that a cabling link will support the desired network rate.

Network Connectivity Testing

TestPro can connect to a live Ethernet network through the 10/100/1000 network interface connector, or via Wi-Fi (Edimax EW-7822ULC Wi-Fi USB adapter required). Once connected, TestPro will auto-discover connected devices on the network. You can Ping any other device to verify connectivity with traceroute and measure latency.

Wi-Fi Testing

TestPro can auto-discover all 2.4GHz and 5GHz Wi-Fi SSIDs and their associated RSSI values (received power level). This is helpful in discovering Wi-Fi “dead zones” and checking Wi-Fi connectivity with an optional Edimax EW-7822ULC Wi-Fi USB Adapter.

Industry’s Best Warranty

All TestPro CV100’s come with a full 2-year warranty from date of purchase – double what competitors offer and proof of our confidence in the quality and reliability of our instruments.

TESTPRO CV100-K11

Fiber Certification Kit

Two TestPro platforms, certificates of calibration for each TestPro platform and fiber adapters, two hanging straps, quick start guide, USB cable, USB flash drive with TestDataPro results management software, two AC power adapters, AD-SM-01 Single mode Fiber adapter kit with dual wavelength light source 1310/1550nm and integrated visual fault locator and volt meter, interchangeable FC connectors for the transmit ports, pair of FC-LC launch cords for connecting the transmit port to the fiber link under test, interchangeable LC connectors for the receive ports, pair of LC-LC reference cords for the receive side, one LC-LC duplex coupler for setting reference, AD-MM-01 Multimode fiber adapter kit with dual wavelength light source 850/1300nm with integrated visual fault locator and volt meter, interchangeable FC connectors for the transmit ports, pair of FC-LC launch cords for connecting the transmit port to the fiber link under test, interchangeable LC adapters for the receive ports, pair of LC-LC reference cords for the receive side, one LC-LC duplex coupler for setting reference, allegator clip voltage test cord, Sticklers cleaning kits, soft carry cases.

TESTPRO CV100-K50

Copper Cable Certification Kit

Two TestPro platforms, certificate of calibration for each TestPro platform, pair of AD-CAT8.1-CH Channel Adapters, Pair AD-CAT6A-PL Permanent Link Adapters, two hanging straps, quick start guide, USB cable, USB flash drive with TestDataPro results management software, two AC power adapters, hard carry case

TESTPRO CV100-K51

Copper and Fiber Cable Certification Kit

Two TestPro platforms, certificates of calibration for each TestPro platform and fiber adapters, pair AD-CAT8.1-CH Channel Adapters, Pair AD-CAT6A-PL Permanent Link Adapters, two hanging straps, quick start guide, USB cable, USB flash drive with TestDataPro results management software, two AC power adapters, AD-SM-01 Singlemode fiber adapter test kit with dual wavelength light source 1310/1550nm and integrated visual fault locator and volt meter, interchangeable FC connectors for the transmit ports, pair of FC-LC launch cords for connecting the transmit port to the fiber link under test, interchangeable LC connectors for the receive ports, pair of LC-LC reference cords for the receive side, one LC-LC duplex coupler for setting reference, AD-MM-01 Multimode fiber adapter test kit with dual wavelength light source 850/1300nm and integrated visual fault locator and volt meter, interchangeable FC connectors for the transmit ports, pair of FC-LC launch cords for connecting the transmit port to the fiber link under test, interchangeable LC adapters for the receive ports, pair of LC-LC reference cords for the receive side, one LC-LC duplex coupler for setting reference, allegator clip voltage test cord, Sticklers cleaning kits, hard carry case for TestPro, soft carry cases for fiber adapters

TESTPRO CV100-K60

Smart Building Test Kit for Copper, PoE, Multi-Gigabit

Two TestPro platforms, certificates of calibration for each TestPro platform, pair of AD-CAT8.1-CH Channel Adapters, Pair AD-CAT6A-PL Permanent Link Adapters, Pair AD-NET-CABLE Adapters, two hanging straps, quick start guide, USB cable, USB flash drive with TestDataPro results management software, two AC power adapters, hard carry case

TESTPRO CV100-K61

Smart Building Test Kit for Copper, Fiber, PoE, Multi-Gigabit

Two TestPro platforms, certificates of calibration for each TestPro platform and fiber adapters, pair of AD-CAT8.1-CH Channel Adapters, Pair AD-CAT6A-PL Permanent Link Adapters, Pair AD-NET-CABLE Adapters, two hanging straps, quick start guide, USB cable, USB flash drive with TestDataPro results management software, two AC power adapters, pair of AD-SM-01 Singlemode fiber adapter test kit with dual wavelength light source 1310/1550nm and integrated visual fault locator and volt meter, interchangeable FC connectors for the transmit ports, pair of FC-LC launch cords for connecting the transmit port to the fiber link under test, interchangeable LC connectors for the receive ports, pair of LC-LC reference cords for the receive side, one LC-LC duplex coupler for setting reference, AD-MM-01 Multimode fiber adapter test kit with dual wavelength light source 850/1300nm and integrated visual fault locator and volt meter, interchangeable FC connectors for the transmit ports, pair of FC-LC launch cords for connecting the transmit port to the fiber link under test, interchangeable LC adapters for the receive ports, pair of LC-LC reference cords for the receive side, one LC-LC duplex coupler for setting reference, two Sticklers cleaning kits, hard carry case for TestPro, soft carry cases for fiber adapters